Dr. Diana Portan

MANUSCRIPTS IN INTERNATIONAL PEER REVIEWED JOURNALS & PROCEEDINGS

  1. Lykourgos C. Kontaxis, D. Zachos, Aliona Georgali-Fickel, Diana V. Portan, Stefanos P. Zaoutsos and George C. Papanicolaou*, Dynamic Mechanical Characterization of 3D-Printed PLA Plates 2 with Different Printing Orientations and Nozzle Temperatures, Submitted to the Journal ‘Polymers’ in Febr. 2025, under evaluation
  2. D.V. Portan*, G. Bampounis, A. Koliadima, T. Patsidis, G.C. Papanicolaou, Biodegradation and thermomechanical behavior of 3D printed PLA scaffolds under static and stirring biomimetic conditions, Biomimetics 2024, 9, 743. https://doi.org/10.3390/biomimetics9120743.
  3. D.V. Portan, Effect of the electric field on human cells: from in vitro response to in vivo feedback, IOP Conference Series: Materials Science and Engineering, Volume 1320, International Conference on Electromagnetic Fields, Signals and BioMedical Engineering (https://icems-biomed.emcsb.ro/), 06/06/2024 – 08/06/2024 Cluj-Napoca, Romania.
  4. D.V. Portan, S. Mamali, V. Kostopoulos, T. Katsila, P. Zoumpoulakis, P. Mallis, E. Michalopoulos, A. Koliadima, 3D non-conductive vs. conductive biomedical scaffolds: biodegradation and biocompatibility study under electrical exposure, Book of Proceedings of ICSAAM 2023, 10th International Conference on Structural Analysis and Advanced Materials 10-14 September, Zakynthos, Greece, pp. 54-60, ISSN: 2559-7841
    https://publications.upatras.gr/el/books/157
  5. Kozaniti FK, Manara AE, Kostopoulos V, Mallis P, Michalopoulos E, Polyzos D, Deligianni DD, Portan DV*. Computational and Experimental Investigation of the Combined Effect of Various 3D Scaffolds and Bioreactor Stimulation on Human Cells’ Feedback. Applied Biosciences. 2023; 2(2):249-277. https://doi.org/10.3390/applbiosci2020018
  6. Papanicolaou, G.C.; Kontaxis, L.C.; Kouris, N.; Portan, D.V. Application of an Eco-Friendly Adhesive and Electrochemical Nanostructuring for Joining of Aluminum A1050 Plates. Materials 2023, 16, 2428. https://doi.org/10.3390/ma16062428. IF2022: 4.042
  7. Andrei Marian Feier, Diana Portan*, Doina Ramona Manu, Vassilis Kostopoulos, Athanasios Kotrotsos, Gabriela Strnad, Minodora Dobreanu, Andreea Salcudean and Tiberiu Bataga (2022) Primary MSCs for Personalized Medicine: Ethical Challenges, Isolation and Biocompatibility Evaluation of 3D Electrospun and Printed Scaffolds. Biomedicines 10: 1563. IF2022: 4.75
    https://doi.org/10.3390/biomedicines10071563
  8. George C. Papanicolaou, Dimitrios Karagiannis, Charoula Kousiatza, Lykourgos C. Kontaxis, and Diana V. Portan (2022) Flexural behavior of single-lap joints of similar and dissimilar adherends. Journal οf Adhesion Science and Technology AHEAD-OF-PRINT, 1-25. IF2022: 2.077
    https://doi.org/10.1080/01694243.2022.2035050
  9. Foteini K. Kozaniti, Despina D. Deligianni, Margarita D. Georgiou, Diana V. Portan* (2022) The Role of Substrate Topography and Stiffness on MSC Cells Functions: Key Material Properties for Biomimetic Bone Tissue Engineering, Biomimetics 7: 7. IF2022: 3.7
    https://doi.org/10.3390/biomimetics7010007
  10. George C. Papanicolaou, Lykourgos C. Kontaxis, Diana V. Portan, Grigoris N. Petropoulos, Eleni Valeriou and Dimitris Alexandropoulos (2021) Mechanical Performance Enhancement of Aluminum Single-Lap Adhesive Joints Due to Organized Alumina Nanotubes Layer Formation on the Aluminum Adherends. Appl Nano 2(3): 206-221. IF2022: 6.14
    https://doi.org/10.3390/applnano2030015
  11. G.C. Papanicolaou, D. Portan, L.C. Kontaxis (2021) Interrelation between fiber-matrix interphasial phenomena and flexural stress relaxation behavior of a glass fiber polymer composite, Polymers 13(6): 978. IF2022: 4.32
    https://doi.org/10.3390/polym13060978
  12. D.V. Portan, C. Ntoulias, G. Mantzouranis, A.P. Fortis, D.D. Deligianni, D. Polyzos, V. Kostopoulos (2021) Gradient 3D Printed PLA Scaffolds on Biomedical Titanium: Mechanical Evaluation and Biocompatibility, Polymers, Special Issue ‘Applications of Biopolymer Scaffolds’, Journal ‘Polymers’ 13(5): 682. IF2022: 4.32
    https://doi.org/10.3390/polym13050682
  13. Glaskova-Kuzmina T, Aniskevich A, Papanicolaou G, Portan D, Zotti A, Borriello A, Zarrelli M. (2020) Hydrothermal Aging of an Epoxy Resin Filled with Carbon Nanofillers. Polymers 12: 1153. IF2022: 4.32
    https://doi.org/10.3390/polym12051153
  14. Elisa-Florina PLOPEANU, George PAPANICOLAOU, Diana PORTAN (2020) Experimental Research on The Behavior of Biocompatible Magnesium Alloys when Immersed in Physiological Fluid. Annals of the Faculty of Engineering Hunedoara, Vol. 18, Iss. 1: 121-125.
  15. Kostopoulos V., Kotrotsos A., Fouriki K., Kalarakis A., Portan D. (2020) Fabrication and Characterization of Polyetherimide Electrospun Scaffolds Modified with Graphene Nano-Platelets and Hydroxyapatite Nano-Particles. Int. J. Mol. Sci., 21(2): 583. IF2022: 4.55
    https://doi.org/10.3390/ijms21020583
  16. Portan DV, Deligianni DD, Papanicolaou GC, Kostopoulos V, Psarras GC, Tyllianakis M. (2019) Combined Optimized Effect of a Highly Self-Organized Nanosubstrate and an Electric Field on Osteoblast Bone Cells Activity. BioMed Research International, Volume 2019, Article ID 7574635, 8 pages IF2002: 3.24
    https://doi.org/10.1155/2019/7574635
  17. Feier AM, Manu DR, Strnad G, Dobreanu M, Russu OM, Portan D*, Bataga T (2018) A Step Forward Standardization of Biocompatibility Testing on Tissue Culture Polystyrene. Materiale Plastice 55(3): 303-307. IF2022: 0.5
  18. Portan D, Strnad G, Feier AM, Russu OM (2018) Highly Self-Organized Materials: Formation Mechanism and Electrochemical Synthesis. Materiale Plastice, 55(3): 398-404, IF2022: 0.5
  19. Portan DV, Deligianni DD, Deligianni K, Kroustalli AA, Tyllianakis M, Papanicolaou GC. (2018) Modeling of the interaction between osteoblasts and biocompatible substrates as a function of adhesion strength. J Biomed Mater Res A. 106(3): 621-628. IF2022: 4.39
    https://doi.org/10.1002/jbm.a.36265
  20. G Strnad, L Jakab-Farkas, R Cazacu, D Portan and C Petrovan (2018) Wettability of nanotubular titania layers for biomedical applications developed by electrochemical anodization. Materials Science and Engineering 400, IOP Conf. Series: 2018, 072005
  21. Strnad G, German-Sallo Z, Jakab-Farkas L, Cazacu R, Portan D. (2018) Effect of potential ramp in the potentiodynamic stage of anodization on morphology of nanostructured TiO2 developed on Ti6Al4V alloy. Procedia Manufacturing 22: 19-26 IF2022: 0.51
  22. Strnad G, Portan D, Jakab-Farkas L, Petrovan C, Russu O (2017) Morphology of TiO2 surfaces for biomedical applications developed by electrochemical anodization. Materials Science Forum 907 MSF: 91-98. IF2022: 0.48
  23. Strnad G, Jakab-Farkas L, Portan D. (2016) Current-Time Dependence in Self-Organized TiO2 Layers Synthesis by Electrochemical Anodization. Academic Journal of Manufacturing Engineering 14(4): 112-118. IF2022: 0.19
  24. G.C. Papanicolaou, D.V. Portan, G.N. Petropoulos, L.C. Kontaxis (2016) Effect of TiO2 Nanotubes Developed on Pure Titanium Substrates on the Mechanical Performance of Titanium-Titanium Single-Lap Adhesive Joints. Cienc Tecnol Mater 28: 130-137.
    https://doi.org/10.1016/j.ctmat.2016.02.004
  25. Papanicolaou GC, Charitidis P, Mouzakis DE, Karachalios E, Jiga G, Portan DV. (2016) Experimental and Numerical Investigation of Balanced Boron/ Epoxy Single Lap Joints Subjected to Corrosive Environmental Conditions. International Journal of Adhesion and Adhesives 40: 224-237. IF2022: 3.18
  26. Portan DV, Nikolopoulou F, Bairami V, Mouzakis D, Papanicolaou GC, Deligianni DD. (2016) Electrochemical Surface Processing Applied for the Functionalization of Titanium Screw Type Implants. Journal of Materials Science & Surface Engineering 4 (3): 376-382.
  27. G.C. Papanicolaou, G. Kouveliotis, F. Nikolopoulou, K.P. Papaefthymiou, V. Bairami, D.V. Portan (2014) Thermal shock cycling effect on the compressive behaviour of Human teeth. Biomechanics 48(4): 681-686. IF2022: 2.71
    https://doi.org/10.1016/j.jbiomech.2014.12.039
  28. Papanicolaou GC, Charitidis CA, Portan DV, Perivoliotis DK Koklioti MA. (2014) Investigation of nanomechanical properties of multilayered hybrid nanocomposites. Meccanica 49(11): 2645-2655. IF2022: 2.53
  29. Portan DV, Papanicolaou GC, Jiga G, Caposi M (2012) A novel experimental method for obtaining multilayered TiO2 nanotubes through electrochemical anodizing. Journal of Applied Electrochemistry 42: 1013-1024. IF2022: 2.39
  30. Portan DV, Papaefthymiou K, Arvanita E, Jiga G, Papanicolaou GC. (2012) A combined statistical and microscopic analysis of TiO2 nanotubes synthesized under different electrochemical anodizing conditions. J Mater Sci 47(11): 4696-705. IF2022: 4.39
  31. Portan DV, Kroustalli AA, Deligianni DD, Papanicolaou GC. (2012) On the biocompatibility between TiO2 nanotubes layer and human osteoblasts. Journal of Biomedical Materials Research – Part A 100A(10): 2546-2553. IF2022: 4.22
  32. Papanicolaou GC, Xepapadaki AG, Drakopoulos ED, Papaefthymiou KP, Portan DV. (2012) Interphasial viscoelastic behavior of CNT reinforced nanocomposites studied by means of the concept of the hybrid viscoelastic interphase. J Appl Polym Sci 124(2): 1578-88. IF2022: 3.057
  33. Papanicolaou GC, Drakopoulos ED, Anifantis NK, Papaefthymiou KP, Portan DV. (2012) Experimental, analytical, and numerical investigation of interphasial stress and strain fields in MWCNT polymer composites. J Appl Polym Sci 123(2): 699-706. IF2022: 3.057
  34. Papanicolaou GC, Papaefthymiou KP, Koutsomitopoulou AF, Portan DV, Zaoutsos SP. (2012) Effect of dispersion of MWCNTs on the static and dynamic mechanical behavior of epoxy matrix nanocomposites. J Mater Sci 47(1): 350-359. IF2022: 4.22
  35. Ionita D, Mazare A, Portan D, Demetrescu I. (2011) Aspects relating to stability of modified passive stratum on TiO2 nanostructure. Metals and Materials International 17(2): 321-327. IF2022: 3.642
  36. Portan D, Papaefthymiou K, Pirvu C, Papanicolaou G, Demetrescu I. (2011) Manufacturing and characterization of TiO2 nanotubes on pure titanium surfaces for advanced biomedical applications. UPB Scientific Bulletin, Series B: Chemistry and Materials Science 73(2):181-196, IF2022: 2.95
  37. Papanicolaou GC, Demetrescu I, Portan DV, Papaefthymiou KP. (2011) Interphase modeling of human osteoblasts spread on pure titanium surface covered with TiO2 nanotubes. Composite Interfaces, 18(1):23-35, IF2022: 0.47
  38. Demetrescu I, Ionita D, Pirvu C, Portan D. (2010) Present and future trends in TiO2 nanotubes elaboration, characterization and potential applications. Molecular Crystals and Liquid Crystals 521: 195-203. IF2022: 0.89
  39. Portan D, Ionita D, Demetrescu I. (2009) Monitoring TiO2 nanotubes elaboration condition, a way for obtaining various characteristics of nanostructures. Key Engineering Materials 415: 9-12. IF2022: 0.49

CHAPTERS

  • G.C. Papanicolaou and D.V. Portan, 2015, Carbon and TiO2 Nanotube – Polymer Composites: Manufacturing – Characterization and Interphasial Modeling, Chapter 44, in ‘Structural Integrity and Durability of Advanced Composites Innovative Modelling Methods and Intelligent Design’, Edited by: Peter Beaumont, Cambridge University Department of Engineering and Wolfson College, Cambridge, UK; Constantinos Soutis, School of Mechanical, Aerospace and Civil Engineering and the Aerospace Research Institute, University of Manchester, UK; Alma Hodzic, Faculty of Engineering, The University of Sheffield, UK, Published: May 2015, Imprint: Woodhead Publishing, ISBN: 978-0-08-100137-0
  • V. Iordache, M. C. Arama, L. Bodea, R. Budulache, D. H. Portan, L. Stoica, 2008, Chapter: Biologia ca forma a culturii, English: Biology as an expression of culture, results of the program RENASCENT SP- C2005- PO4, Ed. Ars Docendi, Bucharest 2008.

OTHER PUBLICATIONS

  • Papanicolaou GC, Portan DV (2015) Measuring and Modeling the Dynamic Frictional Coefficient between Ice and TiO2 Nanotubes grown on Pure Titanium Plates, Paper contribution in a volume edited in memory of Professor V. Papazoglou, Ed. National Technical University of Athens, pp. 349-357
  • Kokkinos AP, Portan DV, Saridaki X, Katerelos DTG (2020) Experimental and Numerical Approach in the Acoustical Behaviour of Kefalonian Traditional Instruments Made from Different Materials. International Journal of Science and Research (IJSR), 9(5): 607-616, DOI: https://doi.org/10.21275/SR20504173104

CONFERENCES PARTICIPATION

  • D.V. Portan, Invited Speaker, Effect of the electric field on human cells: from in vitro response to in vivo feedback, International Conference on Electromagnetic Fields, Signals and BioMedical Engineering 6-8 June 2024, Cluj-Napoca, Romania, https://icems-biomed.emcsb.ro/
  • M. Thabet, D. Portan, G. Michanetzis, V. Kostopoulos, A. Kotrotsos, D. Kouzoudis, Surface characterization of 3D biomedical scaffolds with enhanced bio-integration, International Conference on Structural Analysis of Advanced Materials, ICSAAM, 10-14 of September 2023, Zakynthos, Greece
  • A. Angelopoulou, D.V. Portan, L.C. Kontaxis, D. Kouzoudis, G.C. Papanicolaou, Biodegradation profile of 3D printed PA scaffolds after long-term immersion in cell culture medium, International Conference on Structural Analysis of Advanced Materials, ICSAAM, 10-14 of September 2023, Zakynthos, Greece
  • D. Karagiannis, Ch. Kousiatza, L.C. Kontaxis, D.V. Portan, G.C. Papanicolaou, Theoretical and experimental investigation of flexural behavior of single-lap joints of similar and dissimilar adherends, International Conference on Structural Analysis of Advanced Materials, ICSAAM, 10-14 of September 2023, Zakynthos, Greece
  • Diana V. Portan, Plenary lecture, Biomimetic biomaterials: functioning principles, key properties and perspectives, International Conference on Structural Analysis of Advanced Materials, ICSAAM, 10-14 of September 2023, Zakynthos, Greece
  • S. Mamali, G. Strnad, G.C. Papanicolaou, D.V. Portan, Immersion of 3D non-conductive vs. conductive biomedical scaffolds in cell culture medium: fluid absorption and biodegradation, International Conference on Structural Analysis of Advanced Materials, ICSAAM, 10-14 of September 2023, Zakynthos, Greece
  • A.E. Manara, F.K. Kozaniti, V. Kostopoulos, D.V. Portan, A computational approach for the investigation of the combined effect of 3D scaffold features and bioreactor stimulation on human cells’ feedback, International Conference on Structural Analysis of Advanced Materials, ICSAAM, 10-14 of September 2023, Zakynthos, Greece
  • F.K. Kozaniti, A.E. Manara, V. Kostopoulos, D.V. Portan, The combined effect of 3D scaffold features and bioreactor stimulation on human cells’ feedback, International Conference on Structural Analysis of Advanced Materials, ICSAAM, 10-14 of September 2023, Zakynthos, Greece
  • Minodora Dobreanu, Doina Manu, Diana Portan, Modern methods and techniques for testing artificial substrates biocompatibility, International Conference on Structural Analysis of Advanced Materials, ICSAAM, 10-14 of September 2023, Zakynthos, Greece
  • Diana V. Portan, T. Katsila, P. Zoumpoulakis, V. Kostopoulos, Invited lecture, Electrospun and printed 3D scaffolds with biomimetic features and growth factor delivery potential for in vitro maintenance of human bone cells, International Summit on Biopolymers and Polymer Science, May 11-13, ISBPS 2023, Brussels, Belgium
  • D. V. Portan, D.Polyzos, D.D. Deligianni, Flash talk & POSTER: In vitro investigation of 3D electrospun and printed scaffolds for biomimetic programming of bone replacing artificial tissues, Results of COMPACT project no. 2060, ESAO 2022 Congress, 6-10 September, Krems, Austria
  • Diana Portan, Despoina Deligianni, Demosthenes Polyzos, Invited speaker: Biomimetic programming of biomaterial features based on modeling and experimental approaches, Section: Performance Parameters in Laboratory Medicine – from theory to practical use, Results obtained in the context of the Project COMPACT no. 2060, AMLR 2022, 25-27 of May, Brasov, Romania
  • D.V. Portan, V. Kostopoulos, C. Ntoulias, G. Mantzouranis, G. Sotiriadis, P. Yiallouro, Invited speaker: 3D printed bio-scaffolds on biomedical titanium: mechanical properties and biocompatibility, MTM 2019, 31 of October – 1st of November, Istanbul, Turkey
  • Strnad, G., Jakab-Farkas, L., Cazacu, R., Portan, D., Petrovan, C., Presentation: Wettability of nanotubular titania layers for biomedical applications developed by electrochemical anodization, ModTech 2018, 13-16 of June, Constanta, Romania
  • Portan, DV, Papanicolaou GC. Presentation: Properties predictive modeling through the concept of a hybrid interphase existing between phases in contact. AIP Conference Proceedings ICSAAM 2017, 1932: 030033, 19-22 of September, Bucharest, Romania
  • Papanicolaou GC, Portan DV. Presentation: Analytical modeling of micro and nano-composites. AIP Conference Proceedings ICSAAM 2017, 1932: 020003, 19-22 pf September, Bucharest, Romania
  • Kontaxis LC, Pavlou C, Portan DV, Papanicolaou GC. Presentation: Effect of saline absorption on the flexural stress relaxation behavior of epoxy/cotton composite materials for orthopedics applications. AIP Conference proceedings ICSAAM 2017, 1932: 030020, 19-22 of September, Bucharest, Romania
  • Kontaxis L.C., Georgali A, Portan DV, Papanicolaou GC. Presentation: Flexural creep behavior of epoxy/cotton composite materials before and after saline absorption for orthopedics applications. AIP Conference proceedings ICSAAM 2017, 1932: 030044, 19-22 of September, Bucharest, Romania
  • Papanicolaou GC, Pappa EJ, Portan DV, Kotrotsos A, Kollia E. Presentation: Effect of stacking sequence and surface treatment on the thermal conductivity of multilayered hybrid nano-composites. AIP Conference proceedings ICSAAM 2017, 1932: 030030, 19-22 of September, Bucharest, Romania
  • Strnad G, German-Sallo Z, Jakab-Farkas L, Petrovan C, Portan D. Presentation: Influence of electrical parameters on morphology of nanostructured TiO2 layers developed by electrochemical anodization. MATEC Web of Conferences 2017, 112: 04021, IManE&E 2017, 3rd of July
  • Strnad G, German-Sallo Z, Jakab-Farkas L, Cazacu PR, Portan D. Presentation: Effect of potential ramp in the potentiodynamic stage of anodization on morphology of nanostructured TiO2 developed on Ti6Al4V alloy, 5-6 of October, InterEng 2017, Tg Mures, University ‘Petru Maior’ of Tg Mures, Romania
  • Strnad G, Jakab-Farkas L, Petrovan C, Bica C, Portan D. Presentation: Novel SB, AE and SLA surfaces for dental implants modified at nano scale level with titania nanostructures. 5th International Conference on Powder Metallurgy and Advance Materials RoPM & AM 2017, 17-20 of September, Cluj, Romania
  • Strnad G, German-Sallo Z, Jakab-Farkas L, Cazacu R, Russu O, Feier A, Portan D, Kontaxis L. POSTER: Self-organized nanotubular oxide layers’ synthesis on micro rough surfaces of Ti6Al4V alloy for bio-implants, ESB 2017, 28th Annual Conference of European Society of Biomaterials, 4-8 of September 2017, Athens
  • Strnad G, Portan D, Jakab-Farkas L, Petrovan C, Russu O. Presentation: Morphology of TiO2 surfaces for biomedical applications developed by electrochemical anodization, 8-11 of March, Bramat 2017, Brasov, Romania
  • Portan DV, Kroustalli AA, Papanicolaou GC, Deligianni DD, POSTER: Adhesion Strength and Modeling of Human Bone Cells on Advanced Biomedical Substrates, 11-14 of June, MBE 2016 (Matrix Biology Europe), Athens
  • Portan DV, Deligianni D, Psarras GC, Papanicolaou GC. Presentation: Investigation of Human Bone Cells Response deposited on Different Substrates to an Electrical Active Environment, 10th Anniversary Conference of the Hellenic Society of Biomaterials, November 26-28, 2015, Athens
  • Bairami V, Nikolopoulou F, Portan DV, Mouzakis D. Presentation: Micro – porous titanium surfaces for an Improved Biocompatibility of Titanium Dental Implants, 10th Anniversary Conference of the Hellenic Society of Biomaterials, November 26-28, 2015, Athens
  • Portan DV, Petropoulos GN, Kontaxis L, Papanicolaou GC. Presentation: Effect of TiO2 Nanotubes developed on Pure Titanium Substrates on the Mechanical Performance of Titanium-Titanium Single Lap Adhesive Joints, ICSAAM 2015, 8-11 of September, Porto, Portugal
  • Portan DV, Papanicolaou GC, Mouzakis D, Pappa EJ, Deligianni DD, Kroustalli AA. Presentation: Biomedical Nitinol Investigation: Shape Memory Effect and Biocompatibility, 9th Meeting of the Hellenic Society of Biomaterials 2014, November 7-8, Athens
  • Papanicolaou GC, Portan DV. Presentation: Modeling of tissue – implant interaction, 9th Meeting of the Hellenic Society of Biomaterials 2014, November 7-8, Athens
  • Nikolopoulou F, Portan DV, Bairami V, Mouzakis D. Presentation: Micro – Porous Titanium Surfaces for Improved Biocompatibility of Titanium Implants in Dental Surgery, 9th Meeting of the Hellenic Society of Biomaterials 2014, November 7-8, Athens
  • Economidou SN, Portan DV, Basturescu A, Kontaxis L, Papanicolaou GC. Presentation: Electrochemical manufacturing of TiO2 nanotubes: effect on the interfacial pull-out mechanism, 9th Meeting of the Hellenic Society of Biomaterials 2014, November 7-8, Athens
  • Papanicolaou GC, Portan DV. Presentation: Modeling of Interphases Created Between Living and Non-Living Materials, 8th Annual Conference & Union Ceremony with the Italian Biomaterials Society, November 2013, Athens, Greece
  • Portan DV, Papanicolaou GC, Caposi M. Presentation: Heat treatment structural changes of nitinol, 3rd ICEAF 2013, 26-28 of June, Kos, Greece
  • Portan DV, Kontaxis L, Vazdoaga M, Cordoneanu A. Presentation: Creep and Relaxation Behavior of Micro and Nano TiO2 Particulate Epoxies, ICSAAM 2013, 23-26 of September, Kos, Greece
  • Papanicolaou G.C., Portan D.V., Kousiatza Ch, Sultan DM. Presentation: Experimental and Analytical Investigation of the Interfacial Stress Field in Single-Lap Joints between Similar and Dissimilar Materials, 3rd ICEAF 2013, 26-28 of June, Kos, Greece
  • Papanicolaou GC, Portan DV, Economidou S. Presentation: The Role of the TiO2 Nanotubes on the Titanium-Polymer Interfacial Pull-out Mechanism, 3rd ICEAF 2013, 26-28 of June, Kos, Greece
  • Portan DV, Koutsomitopoulou A, Covaliu CI, Papanicolaou GC. Presentation: Dynamic Mechanical Analysis of TiO2 Fe Nanoparticles – Reinforced Epoxies, Therma 2012, 25-27 of May, Thessaloniki, Greece
  • Portan DV, Papanicolaou GC. POSTER: A Predictive Model for the Dynamic Friction Coefficient, 10th edition of the International Conference on Durability of Composite Systems, Duracosys 2012, Vrije Universiteit van Brussel, 17-19 of September, Belgium
  • Portan DV, Papanicolaou GC, Bouropoulos N. Presentation: Manufacturing and Characterization of TiO2 Nanotubes for Solar Cells and Biomedical Applications, DFC-11 & SI-5 Conference 2011, Queens’ College, Cambridge, 13-15 of April, UK
  • Papaefthymiou KP, Drakopoulos ED, Koutsomitopoulou AF, Portan DV, Zaoutsos SP, Papanicolaou GC. Presentation: Dynamic Mechanical Behavior of Epoxy Matrix-MWCNT Nanocomposites, DFC-11 & SI-5 Conference 2011, Queens’ College, Cambridge, 13-15 of April, UK
  • Papanicolaou GC, Diana Portan. Presentation: Synthesis, Characterization and Biomedical Applications of TiO2 Nanotubes, 8th International Conference on Nanosciences & Nanotechnologies – NN11 (2011) Thessaloniki, 12-15 of July
  • Papanicolaou GC, Diana Portan. Presentation: Predictive Models for Tissue – Implant Interaction Behavior. Scientific meeting of the Hellenic Society of Biomaterials 2011, Athens, November 18-19
  • Portan DV, G.C. Papanicolaou. Presentation: Parameters Affecting the Structure and Geometry of TiO2 Nanotubes Produced for Advanced Biomedical Application, 5th Biomaterials Conference of the Hellenic Society of Biomaterials (EEB) together with the Scientific Societies of Knee, Hip and Reconstructive Knee, Hip Surgery of the Hellenic Society of Orthopedic Surgery and Traumatology (EEXOT), Thessaloniki 2010, November 26-28